Hydro Marine Plywood (rotary cut veneers)

According To The Regulations Of Lloyd's Register

The Hydro marine plywood is made from approximately 1.3 mm rotary-cut veneers on both sides, continuously made from the same wood type. Produced according to EN 636-3, with AW 100 bonding = weatherproof, waterproof and boil-proof bonded.
The Hydro marine plywood is manufactured according to the regulations of Lloyd's Register BS 1088:2018 – Marine Plywood – and EN 314-1993, Bonding Class 3 for outdoor use.

Application Area:

Marine plywood for hull and deck construction.
Attention: Coating and edge protection are absolutely required!

Panel Jointing for Large Formats:

Longer panels can be manufactured by cross-jointing, with or without bonding of the individual panels upon request.

Note on Hydro Marine Plywood:

The Hydro marine plywood is a technical, not a decorative, boatbuilding panel. For the top and bottom veneers, we reserve the right to deliver peeled or composite veneers with joint-bonded seams.