Sommerfeld Marine Deck Plywood Type Lloyd
The Panel consists of approximately 3-15 mm teak deck strips with rubber joints on one side. The joint spacing is 70:7:70 mm, etc. Marine plywood is applied to the back side. The bonding is done according to EN 636-3, with AW 100 bonding = weatherproof, waterproof and boil-proof bonded.
Application Area:
For sun decks, pool decks, wellness areas, in large shipbuilding or on motor yachts. This panel type is not suitable for sailboats.
Attention: Edge protection is absolutely required!
Note on the Strip Deck Panel Type Lloyd
This panel consists of approximately 3-15 mm teak deck strips with rubber joints on one side. Therefore, these panels are naturally prone to deformation! They can only be used when fully screwed or glued down! Proper flat storage is essential!
| thickness mm | construction | Article No. | EUR / m² | |
| 8 | Type B 3 mm Teak + 5 mm Plywood | 07052082 | on inquiry | Add to notepadFrom the notepad |
| 14 | Type A 8 mm Teak + 6 mm Plywood | 07052141 | on inquiry | Add to notepadFrom the notepad |
| 16 | Type A 10 mm Teak + 6 mm Plywood | 07052161 | on inquiry | Add to notepadFrom the notepad |
| 20 | Type A 12 mm Teak + 8 mm Plywood | 07052201 | on inquiry | Add to notepadFrom the notepad |
| 25 | Type A 15 mm Teak + 10 mm Plywood | 07052251 | on inquiry | Add to notepadFrom the notepad |
SOTI informs
price base: private customer / ex works Mölln unpacked / incl. German tax
