Hydropont Deck Plywood (sliced cut veneers)

Flooring For Interior Fitting

The Hydropont strip deck panel is made from approximately 1.3 mm sliced veneer on one side, with embedded wood veins. The vein spacing is 40:4:40 mm, etc. The core layers are made from Okoumé, with a sliced veneer on the back side. The bonding is done according to EN 636-2, with AW 100 bonding = weatherproof, waterproof and boil-proof bonded.

Application Area:

The Hydropont strip deck panel is suitable as flooring for interior boat fitting or for tables and decorative surfaces.
Attention: Coating and edge protection are absolutely required!

Note on the Hydropont Strip Deck Panel:

The Hydropont strip deck panel consists of approximately 1.3 mm sliced veneer on one side with wood veins. Therefore, these panels are naturally prone to deformation! They can only be used when fully screwed or glued down! Proper flat storage of the panel is essential!